Kalamazoo Ind. 20" Enclosed Metallurgical Cutoff Saw K20E
Have one to sell?
ConditionNew
$35,000.00 USD
New
The K20E is designed for cutting metal samples, such as coupons and to inspect internal properties for example after heat treating.
K20E 20 inch enclosed metallurgical cut off saw comes with a powerful 15HP 3PH (220V or 440V) standard with air/oil power down feed, enclosed, oscillation and pump and tank system.
This K20E 20 inch enclosed wet saw keeps the dirt and coolant off your shop or lab floor all while giving you bright clean cuts if you have the correct abrasive wheel and the power down feed is setting!
The K20E 20 inch industrial wet abrasive chop saw is used in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments.
Optional equipment:
Oscillation, cabinet door interlocks, t-slot tables, X axis table, bed filter/ pump systems, air vises and specials made to customer specs.
Totally enclosed cabinet.
($29,625) 15 HP SD motor
or
($30,400) 20 HP SD motor
Magnetic starter
3 PH (220/440V) please specify
Side access ports for long stock
V-belt drive, sealed ball bearings.
Capacities: 4″ solid, 6″ shapes.
Air chain vise,
1″ spindle arbor, 1550 RPM, Also available in 32mm arbors.
Coolant pump, 10 gal., 1/3 HP., Dual coolant hoses.
Internal light.
Front and side access doors.
Semi-automatic: saw head returns at end of cut.
Manual stock feed.
Air over oil precises downfeed, 0-12 FPM feedrate.
Adjustable down stop limits depth of cut.
Also available in 575V 50Hz
The K20E is designed for cutting metal samples, such as coupons and to inspect internal properties for example after heat treating.
K20E 20 inch enclosed metallurgical cut off saw comes with a powerful 15HP 3PH (220V or 440V) standard with air/oil power down feed, enclosed, oscillation and pump and tank system.
This K20E 20 inch enclosed wet saw keeps the dirt and coolant off your shop or lab floor all while giving you bright clean cuts if you have the correct abrasive wheel and the power down feed is setting!
The K20E 20 inch industrial wet abrasive chop saw is used in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments.
Optional equipment:
Oscillation, cabinet door interlocks, t-slot tables, X axis table, bed filter/ pump systems, air vises and specials made to customer specs.
Imperial
| Type: | Wet |
| Enclosed (Y/N) | Yes |
| RPM | 1950 rpm |
| Dimensions | L 50″ x W 34″ x H 80″ |
| Weight | 800 |
Totally enclosed cabinet.
($29,625) 15 HP SD motor
or
($30,400) 20 HP SD motor
Magnetic starter
3 PH (220/440V) please specify
Side access ports for long stock
V-belt drive, sealed ball bearings.
Capacities: 4″ solid, 6″ shapes.
Air chain vise,
1″ spindle arbor, 1550 RPM, Also available in 32mm arbors.
Coolant pump, 10 gal., 1/3 HP., Dual coolant hoses.
Internal light.
Front and side access doors.
Semi-automatic: saw head returns at end of cut.
Manual stock feed.
Air over oil precises downfeed, 0-12 FPM feedrate.
Adjustable down stop limits depth of cut.
Also available in 575V 50Hz
We use cookies to improve your experience. Privacy Policy.